Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


DEGREASOL COLD WASH

 

ROCHEM COLD WASH is a highly concentrated emulsifying solvent that quickly penetrates oil and grease deposits forming an emulsion that turns milky white and rinses away when washed with water. Surfaces will rinse freely whether the water is hot or cold, salt or fresh. With a flash point over 65o°C(150°F) ROCHEM COLD WASH minimizes fire hazards that are present when other more volatile products are used.

It is so easy and efficient to use that it is much more economical and faster than hand scrubbing operation. ROCHEM COLD WASH does not corrode metals.

 

USAGE

 

Dirt, oil, grease and grime are rapidly emulsified and rinsed away from aluminum, brass, steel, cast iron, chrome plate porcelain, glass, painted surfaces, stone, cement and wood.

COLD WASH is regularly used aboard ships for cleaning tanks, bilges, floor plates, tank tops, and machinery spares: in factories for cleaning machinery, manufactured parts, engines, motors, conveyors, floor etc. : by contractors for cleaning road building machinery, scrapers, mixers, bulldozers, cranes, trunks, equipment, etc.: on farms, garages and services stations for cleaning motors and machine parts, chassis and wheels, pits and floors, oil drums, tractors, trucks and other equipments; everywhere dirt, oil, grease and grime accumulate.

 

APPLICATION

 

ROCHEM COLD WASH is applied undiluted by spraying, brushing, soaking, dripping, rubbing, or mopping. Spraying is used for cold cleaning interiors of oil storage tanks or where surfaces to be cleaned are irregular.

 

After spraying, COLD WASH should be allowed to remain from 10 to 20 minutes before rinsing. If a dry surface in not required it is not necessary to rinse with water. Rushing or mopping is used with COLD WASH for removing oil from decks, piers, and other large areas. Dipping and soaking in unheated COLE WASH is the most economical way of cleaning small or large parts.

 

Rubbing with a soft cloth or sponge soaked with COLD WASH is an easy and quick method of cleaning large parts and painted surfaces. Steam cleaning can be speeded up by spraying with COLD WASH a few minutes prior to steam lancing.

 

CAUTION

 

Do not take internally as it is harmful if swallowed. Use with adequate ventilation as the concentrated vapour could be harmful. In case of contact with eyes, flush with water and get medical attention. Keep out of reach of children.

 

 

back

 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player